DS37 Sub Micro цифрового усилителя тормозов

DS37 Sub Micro digital Servo

1)Control System: PWM Pulse Width Control
2)Processor: Digital IC
3)Voltage: 4.8V to 6.0V
4)Driver Type: MOSFET
5)Pulse Width Scope: 900-2100μ S
6)Neutral pulse: 1500μ S
7)Speed: (No-load ): 0.09sec/ 60° @ 4.8V
0.07sec/ 60° @ 6.0V
8)Torque: (Stall Full load): 0.4kg. Cm @ 4.8V
0.5 kg. Cm @ 6.0V
9)Idle Current: < 0.05 A/ 4.8V < 0.05 A/ 6.0V
10)Running Current: < 0.10 A/ 4.8V < 0.10 A/ 6.0V
11)Stall Current: < 0.5 A/ 4.8V < 0.5 A/ 6.0V
12)Motor Type: Coreless Motor
13)Bearings: POM Bush
14)Gear Material: POM Gear
15)Servo case: ABS
16)Plug: JR plug
17)Connect wire length: 165MM
18)Weight: 3.7grams
19)Dimensions (L * W * H): 20.0 * 17.6 * 8.0mm 10)Programmable brake type(disable/soft brake/hard brake) 11)Time advance programmable (low/standard/high)

12)Programmable current limiting(very sensitive/standard/insensitive/disable)
13)Governor mode(low rpm governor/high rpm governor)
14)Programmable startup type(very soft start/soft start/fast start)
15)Thermal Protection(100 centigrade)
16)Apply to most of inrunner and outrunner brushless motors.
17)No complex programming, auto adapt work mode.
18)A LED (flashes) indicates full throttle.
19)Runs motor in forward or reverse by swapping any two motor wire connections.
20)Safe "power on" arming program ensures motor will not accidentally turn on.
21)Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds. After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
22)The ESC is disabled when the voltage is over 15V at power-on.

Dimension: 41mmX23mmX6mm
Weight: 17g(include wires)