G 2" Inlet Silencer, Outlet Silencer, Muffler for Regenerative Blower

• цвет: золотой
• снижение уровня шума: около 5db
• установка: случайный
• доступный размер: G1" G1.2" G1.5" G2" G2.5" G4"
• тип подключения: наружная резьба/винт с наружной резьбой
• Транспортная Упаковка: Packed in Cartons
• Модель №.: FLS-20
• Характеристики: CE RoHS CCC SGS ISO9001
• Торговая Марка: Goorui
• Происхождение: China
• Код ТН ВЭД: 8414100090
• Производственная Мощность: 2520/Day

Описание Товара

There is an inside silencer in our Goorui blower, and it has debased the noisy to a low-lying level.

If you have higher requirement to the noise, please use our FLS series external silencer, usually it can decrease about 5dB.

FLS series external silencer will be installed in the end of inlet & outlet pipe (the farthest place of inlet & outlet ). Usually only one is ok! If you use its suction function, the silencer should be set in the end of outlet pipe; If you use its blow function, then take the opposite ways.

If you are still not satisfied with the noisy after using our FLS series external silencer, then we suggest you make a sound insulation box according to the equipment. Specifically speaking, you can take a box to cover the blower, and then put silencer cotton inside the six face of the box. (usually, the tight cotton should own 20mm thickness and wave crest is 15mm). At this monment, please pay attention to the aeration and heat-disperse, all direction's min. Distance, inlet air temperature of the blower.
 

Model	Caliber	Matching Blower/Vacuum Pump
FLS-12	G1 1/4"	GHBG series and GHBH 1,2,3 series
FLS-15	G1 1/2"	GHBH 4 series
FLS-20	G 2"	GHBH 5,6,7 series
FLS-25	G2 1/2"	GHBH 8 series
FLS-40	G4"	GHBH 9 series