| After-sales Service: | on Site Installation, Training |
|---|---|
| Warranty: | 1 Year Warranty Including Spare Parts |
| Species: | Die Cutting and Creasing Machine |
| Imprinting Type: | Platen |
| Placing Form of Template: | Horizontal |
| Die Cutting Tool: | Steel Plate |
Поставщики с проверенными бизнес-лицензиями
Сертифицированный Поставщик Brief Introduction:
TD800S fully automatic die cutting machine has 7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registering.
Application:
| Model | ECOO-TD800S |
| Max. Sheet Size | 800x580mm |
| Min. Sheet Size | 310x310mm |
| Max. die cutting size | 790x570mm |
| Min. gripper margin | 8mm |
| Height cutting rules | 23.8mm |
| Inside chase size | 940 x 610mm |
| Stock range | Cardboard: 800-2000g/m² B flute |
| Max. pressure(N) | 200T |
| Max. Die cutting speed | 7000s/h |
| Feeding pile height | 1300mm |
| Delivery pile height | 1000mm |
| Noise | ≤85dB(A) |
| Main motor | 7.5kw |
| Total of power | 15kw |
| Weight of machine | 14.5T |
| Overall dimension | 4900x2000x2000mm |
1. Feeding Unit
• Pile tray with handle allowing manual lateral correction of the pile during production
• Stream-wise feeding system with a highest speed of 120 sheets per minute
• 2 suction cups each for lifting paper, 2 suction cups for moving paper
• Height and angle of suction heads are easily adjustable
• Electronic safety devices preventing feeder pile from over ascending
• Micro-adjustment is available for transversal positioning of pile table
• Precision double-sheet detector
• Easy changeover of pull and push side guides simply by turning a bolt without the need of removing and replacing complete side guide
• 2 front guides with micro-adjustment and the side guide is adjustable by wheel handle
• Photo-electric detector with automatic stop system on feeding table in case of paper jam
• Separate drive controls of feeding unit & the main machine for easy make ready
• PLC and electronic cam for timing control
2. Die cutting Unit
• Siemens main motor controlled by Schneide r inverter control
• Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen
• The pressure accuracy can be up to 0.01mm
• Crank shaft made of 40Cr steel
• Overload protection device with torque limiter for the highest safety of operator and equipment
• After long run test and delivered in pairs, main gripper, chain from Subaki, Japan
• High pressure index drive system for gripper bar positioning control
• Pneumatic lock-up and release of cutting chase
• Centerline system for quick job changeover
3. Stripping Unit
• 3-action movement structure with upper, middle and lower stripping frame to facilitate die change
• Stripping pins or male/female die can be used for different stripping jobs
• Match with the centerline registration system in the diecutting section, the same system also apply to the stripping system to minimize changeover time. Accurate positioning can increase production efficiency
• The up/down movement of upper stripping frame is controlled by motor which makes adjustment easier
4. Delivery Unit
• Safety photo-electric devices preventing over-ascending and over-descending of delivery paper pile
• Adjustable depressor brush helps unloading paper from grippers and piling up paper
• High pile design up to 1020mm
• Automatic auxiliary belt table available for non-stop delivery
• Feeder movement and speed control can be adjusted in the delivery unit
Q: What about the Installation and after-sales technician support?
A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours.
Among our large amount of CTP installations worldwide, there are also many end users (printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular onsite visits.
These end users Printers all run the CTP systems with full satisfaction due to our robust quality, seamless remote service, thorough training and maintanence. If you are a printer who is considering purchasing directly from EcooGraphix China, there is no hasle on installations, training and after sales service. We guarantee your satisfaction.
Поставщики с проверенными бизнес-лицензиями
Сертифицированный Поставщик 
