Used engine Oil for Vehicle and Industrial Usage ...
|Срок Действия Цены:||3/26/2013 ~ 6/12/2013|
- Номер Моделя: YHM-23
- Механический принцип : Вакуум
- Trademark: YOUHUI
- Packing: Standard Export Package
- Origin: Luoyang, Henan
- HS Code: 8419409090
- Production Capacity: 50 Plants Per Year
1. Used black engine oil suit
2. High recycle rate
3. High performance, and environment.
4With low noise oil pump, off gas system
1. Technological Instruction:
Adopting ways or transportation by tins or buckets, the waste mineral oil are unloaded into
Filtering ponds directly. After the process or sedimentation and filter, pumped the waste oil into
Oil-water separator, then discharge the waste water and pump the isolated oil to tank separately.
Through secondary filter, heat the oil up to certain temperature, feed it continuously flow to vacuum
Film evaporator, further desorbs the water in the waste mineral oil to isolate the clean oil and heavy oil.
Then start the secondary filtration in molecular distillers to distillate the lubricating oil with Siemens, PLC and color touch screen to control the whole process.
After cooling in condenser and score still in buffer tank, pump the end product into tank.
2. Technological parameter:
A. Process many senile or waste oil such ash waste hydraulic oil, used oil, diesel oil and waste
B. Distillation under high vacuum low temperature will not destroy the quality or the waste oil which
Good for recycle are.
3. End product after regeneration:
A. Clean and bright, moisture content less than 100PPM, separation degree or the heavy and clean oil are more than 90%
B. The quality or the heavy and clean oil achieves or exceeds the new oil.
C. Recycle rate achieve more than 80%
4. Equipment Configuration:
A. Not fussy about the waste oil, it can recycle the waste oil no more frosted what condition it are.
Used Oil recycling machine (Turnkey plant)
1. Purify the used machinery oil, hydraulic oil, compressor oil, engine oil, mediate-load gear oil, cooler oil, stalk rolling oil, quench oil, flash swift quench oil, etc. in mine, metallurgical industry, machinery, chemical industry, rubber industry, instrument, traffic, oils drilling and exploring, construction ceramics, precision pressure casting, etc.
2. The viscosity are less than 500CST and flash point are higher than 900° C
3. The process are carried out by PLC with intelligent inspection and automatic control.
Сравните с новым маслом, тарифом изменения выкостности
Регенерированное количество масла